Commercial diver qualifications and training credentials

OSHA archive notice: "This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only."

March 29, 2000

The Honorable Joseph I. Lieberman

Office of U.S. Senator Joseph I. Lieberman

[Recipient address omitted]

Dear Senator Lieberman,

This is a follow up response to your December 8, 1999 letter on behalf of Mr. Raymond Palumbo regarding commercial diving. In his letter, Mr. Palumbo seeks clarification from the Occupational Safety and Health Administration (OSHA) regarding the acceptability of commercial diving schools, training to national consensus standards, and commercial diving licenses in meeting the requirements of 29 CFR Part 1910.410 Qualifications of dive team. Please excuse our delay in responding to this request.

OSHA considers an employer to be in compliance with 29 CFR Part 1910.410 requirements if documentation shows that the diver completed training to the appropriate level (e.g., surface-supplied air diver certificate, surface-supplied mixed gas diver certificate) at a commercial diving school within a particular state, military school, federal school (e.g., Army Corps of Engineers), or an Association of Commercial Diving Educators (ACDE) accredited school. An employer is also in compliance when documented evidence attests to the training level of employed divers under the national consensus standard published by the American National Standards Institute (ANSI) and the Association of Commercial Diving Educators (ACDE); ANSI/ACDE-01-1998 American National Standard for Divers - Commercial Diver Training - Minimum Standard. There are no commercial diver licensing programs in the United States, however, there is a commercial diver certification card which is issued through the Association of Diving Contractors International (ADC). OSHA considers an employer to be in compliance with 29 CFR Part 1910.410 diver training requirements for any employed diver with a valid "ADC Commercial Diver Certification Card" for the appropriate training level.

Thank you for your interest in occupational safety and health issues. Should you have any questions or require further assistance regarding this matter, please contact Mr. Stephen Butler from our Division of Maritime Compliance Assistance at (202) 693-2153.

Sincerely,

Charles N. Jeffress

Assistant Secretary