Minimum dive team for two commercial scuba divers

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

February 22, 1996

Mr. Rudy C. Watts
H. T. Marine Services
[Recipient address omitted]
Dear Mr. Watts:

This is in response to your request for an interpretation of OSHA's Commercial Diving standards (29 CFR Part 1910, Subpart T), regarding the minimum number of dive team members required to support scuba diving when two (2) divers are in the water.

In establishing the required number of dive team members required for a particular situation, proper consideration must be given to §1910.421(d) - "Planning and assessment," §1910.421(e) - "Hazardous activities," and §1910.422(b)(3) which requires providing a means to assist an injured diver from the water (e.g., diver stage, small boat, stokes stretcher) or into a bell.

Commercial scuba air diving with two (2) divers in the water requires a minimum of four (4) dive team members as follows: designated person-in-charge (DPIC) [§1910.410(c)], a standby diver [§1910.424(c)(1)], and two (2) divers [§1910.424(c)(2)]. The two (2) divers must be in continuous visual contact of each other or connected by a buddy line. The two (2) divers do not require a tending line to the surface unless they are required to work against a current exceeding one (1) knot. When required or deemed necessary, one (1) tending line to the surface is sufficient when the two (2) divers are connected by a buddy line. With respect to deployment of the standby diver, it is required that the standby diver be line-tended from the surface. The standby diver can be the DPIC provided that he/she is a qualified diver, and that the fourth dive team member is trained and capable of performing all necessary functions of the DPIC while the DPIC is in the water as the standby diver. The standby diver can also be the tender provided that he/she is a qualified diver; in this case the DPIC would assume tending duties when the standby diver is in the water.

Should you require additional clarification please contact Mr. Steve Butler at (202) 219-8131 x154 or myself at (202) 219-8131 x151.

Joe Nolan

Chief
Division of Maritime
Compliance Assistance