Wire rope clips used with wedge sockets
Apply this to your situation
This page explains the general guidance. Ask about your specific situation and see what current federal labor law says, with citations.
August 8, 1994
MEMORANDUM FOR: LINDA R. ANKU
REGIONAL ADMINISTRATOR
THROUGH: JOHN B. MILES, JR. DIRECTOR DIRECTORATE OF COMPLIANCE PROGRAMS
FROM: ROY F. GURNHAM, DIRECTOR OFFICE OF CONSTRUCTION AND MARITIME COMPLIANCE ASSISTANCE
SUBJECT: Wedge Sockets Wire Rope Clips (Piggy-Back Clip)
This is in response to your July 11 memorandum concerning the Piggy-Back wire rope clip. OSHA's policy addressing the use of wire rope clips in conjunction with wedge sockets is outlined in the attached letter to Mr. D. Micheal Barr dated July 27. In accordance with this policy, the Piggy-Back clip can be used with wedge sockets if installed according to the manufacturer's instructions.
If we can be of any further assistance, please contact me (ext. 150) or Mr. Dale Cavanaugh at (202) 219-8136.
Attachment
[Earlier regional memorandum reproduced on OSHA page; omitted here. The referenced July 27 policy letter is not reproduced on the posted page.]
What does federal law require in your situation?
Ezel checks current federal labor law against your facts and answers with citations.
Opens in Ezel Pro.
- Checks the law as it stands today, not only this page
- Cites every source it relies on, so you can verify it
- Chat, drafting and research in one workspace