General-industry confined-space rules at construction sites

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

October 8, 1993

Ms. Suey Howe
Director, Federal Regulations
Associated Builders and Contractors, Inc.
[Recipient address omitted]
Dear Ms. Howe:

This is in response to your April 8 letter requesting an interpretation on the scope of the Occupational Safety and Health Administration's (OSHA) confined space standard for general industry. I apologize for the delay in responding to your inquiry.

OSHA's enforcement policy with regard to confined spaces at construction sites has not changed with the promulgation of the general industry regulation. In those instances where a hazard is addressed by an existing part 1926 standard, OSHA will continue to cite the specific standard. In those cases where a hazard is observed that is not addressed by an existing specific construction standard but is addressed in the American National Standards Institute's Z117.1 consensus standard, OSHA will continue to cite under 5(a)(1) of the Act provided the conditions for citing the general duty clause are present. However, in no circumstance would it be appropriate to cite a construction contractor under 1926.21 and 1926.651 for failure to comply with the requirements of the new general industry rule.

If we can be of any further assistance, please contact me or Mr. Dale Cavanaugh at (202) 219-8136.

Sincerely,
Roy F. Gurnham, P.E., Esq.
Director
Office of Construction and Maritime
Compliance Assistance

[Requester letter reproduced on OSHA page; omitted here.]