Tree-trimming saddle belt testing
Apply this to your situation
This page explains the general guidance. Ask about your specific situation and see what current federal labor law says, with citations.
May 7, 1982
Ms. Sandra B. Kloster
Littler, Mendelson, Fastiff & Tichy
Attorney at Law
[Recipient address omitted]
Dear Ms. Kloster:
This is in response to your letter of April 19, 1982, concerning the correct testing Procedure for tree-trimming saddle belts.
The Occupational Safety and Health Standards do not provide testing procedures for tree-trimming saddle belts at the present time. However, the American National Standards Institute, Inc. ANSI Z133.1-1979 contains safety requirements for pruning, trimming, repairing, maintaining, and removing trees, and for cutting brush. Paragraph 3.2.6 of ANSI Z133.1-1979 requires safety belts or tree-trimming saddle belts as specified in American National Standard Requirements for Safety Belts, Harnesses, Lanyards, Lifelines, and Droplines for Construction and Industrial use, ANSI A10.14-1975, or a saddle formed by a double bowline on a bight shall be worn to protect workers above ground level.
The testing procedure mentioned in your letter appears to comply with the intent of the Occupational Safety and Health Act of 1970 provided the test is preformed as set out in ANSI A10.14-1975. You informed a member of my staff that you have obtained a copy of the ANSI A10.14-1975 standard.
If I may be of further assistance, please feel free to contact me.
Sincerely,
John K. Barto
Chief,
Division of Occupational Safety Programming
What does federal law require in your situation?
Ezel checks current federal labor law against your facts and answers with citations.
Opens in Ezel Pro.
- Checks the law as it stands today, not only this page
- Cites every source it relies on, so you can verify it
- Chat, drafting and research in one workspace