Secretary of Labor v. Raw Coal Mining Company, Inc.

Plain-English summary

MSHA issued three section 104(d)(2) orders at Raw Coal's Sewell Mine B for failing to complete a weekly return-aircourse examination, leaving required stoppings missing or incomplete between intake and return entries, and making unapproved changes to the mine's ventilation system. Judge Alan G. Paez credited the inspectors over the operator's witnesses and found that the missing examination was shown by records, tracking logs, a supervisor's admission, and the mine's response to the order. He found that the stoppings violation knowingly allowed two crosscuts to remain noncompliant and reduced airflow to the working face, and that the plan violation moved an entire stopping line, reversed airflow, created sweep ventilation, and left a dead-air space. Although all three violations were non-S&S, he held that each involved high negligence and unwarrantable failure because of supervisory knowledge, obviousness, duration, extent, or deliberate noncompliance. He affirmed all three orders and assessed the $4,000 statutory minimum for each, totaling $12,000.

Decision snapshot

• Cited standards: 30 C.F.R. §§ 75.364(b)(2), 75.333(b)(1), and 75.370(a)(1)
• Outcome: All three non-S&S orders were affirmed as high-negligence and unwarrantable violations, with total penalties of $12,000.
• Key point: Supervisors cannot substitute informal practices or self-selected ventilation arrangements for required examinations, completed stoppings, and the mine's approved ventilation plan.

Full text (FMSHRC public release)

FEDERAL MINE SAFETY AND HEALTH
REVIEW COMMISSION

OFFICE OF
ADMINISTRATIVE LAW JUDGES

1331 PENNSYLVANIA
AVE., N.W., SUITE 520N

WASHINGTON, DC 20004-1710

TELEPHONE: 202-434-9958
/ FAX: 202-434-9949

August 31, 2017

SECRETARY
OF LABOR

MINE
SAFETY AND HEALTH   

ADMINISTRATION
(MSHA),

Petitioner

v.

RAW
COAL MINING COMPANY, INC.,

Respondent

CIVIL
PENALTY PROCEEDING

Docket
No. WEVA 2015-996

A.C.
No. 46–06265–383951

Mine:
Sewell Mine B

DECISION

Appearances:   Paige
I. Bernick, Esq. (Eric Johnson, Esq., on brief), U.S. Department of Labor,

Office
of the Solicitor, Nashville, Tennessee, for Petitioner;

James
F. Bowman, Safety Consultant, Midway, West Virginia, for Respondent.

Before:                        Judge
Paez

This
case is before me upon a petition for the assessment of civil penalty filed by
the Secretary of Labor (“Secretary”) pursuant to section 105(d) of the Federal
Mine Safety and Health Act of 1977 (“Mine Act”), 30 U.S.C. § 815(d). [1]
In dispute are three section 104(d)(2) orders issued by the Mine Safety and
Health Administration (“MSHA”) to Raw Coal Mining Company, Inc. (“Respondent”
or “Raw Coal”), as owner and operator of the Sewell Mine B (“Sewell mine”) in
Asco, West Virginia. To prevail, the Secretary must prove any cited violation “by
a preponderance of the credible evidence.” In re: Contests of Respirable
Dust Sample Alteration Citations , 17 FMSHRC 1819, 1838 (Nov. 1995) (citing Garden
Creek Pocahontas Co ., 11 FMSHRC 2148, 2152 (Nov. 1989)), aff’d sub nom.
Sec’y of Labor v. Keystone Coal Mining Corp ., 151 F.3d 1096, 1106–07 (D.C.
Cir. 1998).

I.  STATEMENT OF
THE CASE

These three section 104(d)(2) orders
were issued at Raw Coal’s Sewell mine. Although none of them were designated as
significant and substantial (“S&S”), the Secretary characterizes Raw Coal’s
negligence as “high” for all three orders and alleges that the violations were
a result of the company’s unwarrantable failure to comply with mandatory safety
standards. [2]
The Secretary proposes a penalty of $4,000.00 for each violation for a total
penalty of $12,000.00.

This matter was initially the subject of
a default judgement. The Commission, in an order encompassing several
consolidated dockets and operators, granted Respondent’s request to reopen this
case. Allstate Materials, LLC , 38 FMSHRC 645 (Apr. 2016) (reopening
unrelated matters involving eight different operators in a single order). Thereafter,
Chief Administrative Law Judge Robert J. Lesnick assigned me Docket No. WEVA
2015-996, and I held a hearing on March 9, 2017, in Beckley, West Virginia. The
Secretary presented testimony from MSHA Inspector Nicholas Christian and
Inspector Trainee Donald LeMarr. Raw Coal presented testimony from general mine
foreman Fred Ciampanella, mine superintendent Randy Campbell, and third shift
section foreman Burb Blankenship. The parties each filed post-hearing briefs
and reply briefs, whereby the record closed on June 7, 2017.

II.  ISSUES

Raw Coal, through its lay
representative, challenges the fact of the violation, the negligence and
unwarrantable designations, and the proposed penalty for each order.

Order No. 9020987 charges Raw Coal with
a violation of 30 C.F.R. § 75.364(b)(2) for failing to perform the required
weekly examination of the Left Return Aircourse and Seals. Raw Coal, however,
contends it conducted the exam but simply failed to record it.  

Order No. 9064481 charges Respondent
with a violation of 30 C.F.R. § 75.333(b)(1), which requires Raw Coal to
construct a line of stoppings (solid physical barriers) in the crosscuts
between the working section’s intake and return entries, so as to separate the
fresh air in the intake entry from the contaminated air in the return entry. Although
the standard permits the two connecting crosscuts closest to the working face
(where coal is actively being mined) to remain open for travel between the two
entries, the Secretary alleges Raw Coal impermissibly allowed an additional two
crosscuts between those entries to remain open. [3]
Raw Coal, in turn, argues that the third connecting crosscut was permitted to
remain open when the order was issued, and that the ventilation control for the
fourth connecting crosscut was adequately maintained.

Lastly, Order No. 9064486 charges Respondent
with violating its approved ventilation plan in a number of ways, including
moving an entire line of stoppings to a series of crosscuts where they were not
permitted to be, altering the direction of air flow in a return entry, and
creating a dead air space. Raw Coal denies it moved a line of stoppings or altered
the direction of air flow, and argues that the arrangement of its ventilation
controls constituted a permissible variation of the MSHA-approved ventilation plan.

Alternatively, if any violations were to
be found, Raw Coal disputes the unwarrantable failure designations due to the
alleged limited duration and extent of the violation in Order No. 9020987,
inadequate notice that greater efforts were needed for compliance in Order No.
9064481, and complexity of the ventilation map at issue in Order No. 9064486.

Accordingly, the
following issues are before me: (1) whether Respondent violated 30 C.F.R.
§ 75.364(b)(2) as alleged in Order
No. 9020987;
(2)
whether Respondent violated 30 C.F.R. § 75.333(b)(1) as alleged in Order
No. 9064481;
(3) whether
Respondent violated 30 C.F.R. § 75.370(a)(1) as alleged in Order
No. 9064486;
(4) whether the Secretary’s gravity determinations are properly designated for these
three section 104(d)(2) orders ; (5) whether Respondent’s negligence is properly
designated as “high” and constitutes an unwarrantable failure; and (6) whether
the proposed penalties are appropriate.

For
the reasons set forth below, Order Nos. 9020987, 9064481, and 9064486, are AFFIRMED .

III.  FINDINGS
OF FACT

The parties stipulated to the following:

1. Raw
   Coal Mining Company, LLC (“Respondent”) is subject to the Federal Mine Safety
   and Health Act of 1977 and to the jurisdiction of the Federal Mine Safety and
   Health Review Commission.

2. The
   presiding Administrative Law Judge has the authority to hear this case and
   issue a decision.

3. Respondent
   has an effect upon commerce within the meaning of Section 4 of the Federal Mine
   Safety and Health Act of 1977.

4. Respondent
   operates Sewell Mine B, Mine Identification Number 46-06265.

5. Sewell
   Mine B mined 97,208 tons of coal in 2016.

6. Respondent
   abated the citations involved herein in a timely manner and in good faith.

7. Secretary’s
   Exhibits 1 through 22 are admissible.

8. Respondent’s
   Exhibits 1 through 7 are admissible.

(Joint
Ex. 1.)

Raw Coal’s Sewell Mine B is an
underground coal mine in McDowell County, West Virginia. (Ex. R–6.) The Sewell
mine consists of a series of entries and perpendicular crosscuts that together
form a grid if viewed from above. ( See Exs. S–14, S–15.) Its low
ceilings measure approximately 42 to 44 inches in height and generally require
miners to crawl through travelways or ride in a vehicle to get around. (Tr. 25:17–26:4.)
The company mines coal on three daily eight-hour shifts at the Sewell mine. (Tr.
33:1–14.) As the operator advances through a section in the course of normal
mining operations, it leaves pillars of coal between entries and crosscuts that
help support the roof. After a section is completely mined, the operator then
engages in a process commonly referred to as “retreat mining.” In other words,
to collect additional coal from the remaining pillars, Raw Coal removes those
pillars and allows the roof to collapse. (Tr. 67:14–68:6.)

Raw Coal also utilizes a system of
ventilation controls at the mine (including stoppings and curtains positioned
in various crosscuts between entries) to direct fresh air to the active
production sections through “intake” entries, and to direct harmful gases and
dust from the working faces out of the mine through “return” entries. (Tr.
27:11–30:23.) MSHA views the liberation of methane gas, in particular, as a
problem at any underground coal mine due to its explosive potential. However,
the Sewell mine produced significantly less than the 200,000 cubic feet of methane
necessary to warrant a spot inspection (close and frequent monitoring for
issues related to methane buildup), a fact that is reflected in MSHA’s gravity determinations
for the subject orders. (Tr. 34:16–20, 35:10–23, 36:16–37:4; Ex. S–5.)

A.        Order
No. 9020987 – The Weekly Exam Violation

Inspector Christian arrived at the
Sewell mine at 7:25 a.m. on April 7, 2015, to conduct a regular inspection with
MSHA Inspector Trainee Trent LeMarr. [4]
(Tr. 15:3–11, 16:12–22.) They were accompanied by Raw Coal agents Fred
Ciampanella and Randy Campbell. ( Id .) Christian proceeded to the mine
office and began checking Raw Coal’s record books. He immediately noticed the
company had not recorded in its logbook a weekly exam of the left return
aircourse and seals since March 30. (Tr. 15:13–17:5; Ex. S–2.) Raw Coal was
required to conduct and record another weekly exam of the area by April 6 (the
prior day). (Tr. 17:13–14.) Christian knew Ciampanella had accompanied him for
most of the April 6 inspection (which lasted until the early afternoon) and
could not have conducted the weekly exam during that time. (Tr. 24: 15–18,
110:18–24.) But, to be certain, Christian asked Ciampanella, “Did you make the
exam yesterday?” and, according to the inspector, Ciampanella responded, “No, I
did not make the exam yesterday.” (Tr. 17:17–24; Ex. S–4 at 5.) Inspector
Trainee LeMarr fully corroborated Christian’s account of the conversation. (Tr.
276:3–7.) At hearing, however, Ciampanella denied making that statement or even
being asked the question, and insisted he had in fact conducted the exam over
the course of multiple days, including April 6, but simply failed to record that
he had examined the entire left return. (Tr. 245:12–19, 247:20–249:13, 259:3–7.)

Christian next checked the tracking
logbook in the dispatcher’s office for any evidence that Raw Coal had conducted
the weekly exam. [5]
(Tr. 18:8–17.) When entering a return, miners are required to phone the
dispatcher above ground to record their presence in the return and how long they
expect to remain there, so the company knows to look for them if they remain
longer than intended. (Tr. 18:8–14.) The company is also required to keep
written logs of these calls. (Tr. 21:23–22:2.) The logbook did not display any
record of miners entering either the left or right return since April 2. (Tr.
22:1–8; Ex. S–3.) Christian also asked individuals in the dispatcher’s office if
they had any other notes or records indicating that Ciampanella had been in the
return recently. The answer he received was once again, “No.” (Tr. 19:5–8.) At
this point Christian informed Ciampanella and Campbell “that they were to
withdraw the men from the mine until the aircourse [examination] could be made,”
and the company immediately complied with the withdrawal order. (Tr. 19:8–10,
24:19–22.)

Christian told Ciampanella that he was
already planning to travel through the left return airway in the course of his
regular inspection that day, so he intended to accompany Ciampanella when he
conducted the exam to abate the order. (Tr. 24:23–25:3.) However, while the
inspector was checking a coal truck on the surface, Ciampanella hopped onto a vehicle
and hurried underground without slowing down to allow Christian an opportunity
to accompany him. (Tr. 25:4–9.) Because Ciampanella had left him without a
permissible ride, Christian could not travel to the return and observe the
examination himself. (Tr. 25:17–26:24.) Instead, Christian waited at the
surface. [6]
The order was terminated when Ciampanella returned to the surface and presented
a record of the exam he had just conducted. (Tr. 25:14–16.)

B.        Order
No. 9064481 – The Missing and Incomplete Stoppings Violation

At the start of a subsequent inspection
on the morning of April 21, a section foreman at the mine asked Inspector Christian
if the company was permitted to continue cutting, loading, and cleaning a
working section while constructing a stopping. (Tr. 46:4–47:7.) Christian
recalled that just three weeks prior he had cited the company for a violation
of section 75.333(b)(1), which requires stoppings to be installed up to and
including the third crosscut outby the working face, so he believed the company
was concerned that it was again in violation of the same standard. (Tr. 47:5–22;
Exs. S–9, S–10, S–11.) Christian told the section foreman he would assess the
situation when he arrived at the section, and then proceeded with his
inspection, accompanied by LeMarr and Raw Coal agents. (Tr. 47:19–48:3.)

When Christian arrived at the working
section, he observed no stoppings in the three open crosscuts outby the working
section (i.e., the three crosscuts closest to the working face). (Tr. 52:12–53:16;
see Ex. S–7 at 15.) These crosscuts provided access to the left return
entry, where air that has ventilated the face directs dust and gas out to the
surface. ( Id .) While the first two crosscuts closest to the face are
permitted to remain open in order to allow miners to access the return entry if
necessary, the third crosscut (and each one after that) requires a permanent
stopping once the first two crosscuts are fully cut through, bolted, and safe
for travel. [7]
(Tr. 228:13–21.) The ventilation controls are designed to separate fresh air
blowing through the intake entry toward the working face from the contaminated
or dirty outgoing air in the return entry that has already passed through the
working sections, ensuring that a sufficient flow of fresh oxygen reaches the
working face without being diverted (or short circuited) into the return entry.
See 61 Fed. Reg. 9764, 9782 (Mar. 11, 1996) (explaining the rationale
for the ventilation control requirements in 30 C.F.R. § 75.333).

The first crosscut outby the working face
did not contain any ventilation controls, temporary or permanent, while the second
and third crosscuts had temporary curtains installed to control ventilation. (Tr.
53:1–11.) Temporary ventilation controls do not satisfy the standard’s
requirements. See 30 C.F.R.
§ 75.333(b)(1).
Christian observed that the stopping for the fourth crosscut outby the working
section was only partially completed, as it contained exposed un-plastered wood
and a hole (or opening) at the top spanning 8 to 10 feet — half the width of
the crosscut — without even a curtain to fill the gap. (Tr. 48:8–12, 53:11–17,
54:10–15, 61:6–62:17.) Therefore, Christian found Raw Coal to be in violation
of the standard at both the third and fourth crosscuts outby the working
section. (Tr. 78:19–79:2.) He proceeded to take an air reading at the open
crosscut closest to the section face and recorded an airflow rate of only 7,000
cubic feet per minute (“CFM”), well below the mine’s ventilation plan
requirement of an airflow of 12,000 CFM. (Tr. 53:17–54:1, 57:1–13; Ex. S–8.) Christian
explained that by not having stoppings installed, the company was short-circuiting
intake air through the crosscuts into the return entry instead of forcing it toward
the section face. (Tr. 54:1–12.)

According to Christian, when he told Ciampanella
that he would be issuing a section 104(d)(2) order for failing to install the required
stoppings and asked for any mitigating circumstances, Ciampanella responded, “Why
should I install those stoppings, when I’m going to tear them back out tonight
when I begin pillaring?” (Tr. 67:7–13.) Since Raw Coal would eventually be “retreat
mining” in the section, the company would possibly begin “pillaring later that
night” after mining out the area. (Tr. 67:14–68:6.) In other words, the
operator would begin to remove the pillars of coal to let the roof collapse and
bury the section, thereby eliminating the need for any stoppings in the soon-to-be
non-existent crosscuts. ( Id .) Ciampanella’s statement convinced
Christian that Raw Coal was aware of the violative condition but allowed it to
persist for the sake of expediency. (Tr. 73:12–20.)

At hearing, Raw Coal’s witnesses,
Blankenship and Ciampanella, disputed Christian’s testimony regarding the hole
in the stopping for the fourth crosscut. (Tr. 200:15–24, 254:6–20.) Ciampanella
also claimed that the stopping was fully plastered on one side. (Tr. 254:6–16.)
However, the biggest point of contention at hearing was the timing for when the
first crosscut had been fully cut through and bolted such that it was safe for
travel, thereby triggering the requirement for a completed stopping at the
third crosscut.

Christian testified that he was initially
informed the company had finished cutting through the first crosscut earlier
that morning, during the previous shift, but was later told Raw Coal had
completed this process the prior evening. (Tr. 58:23–59:22, 60:1–6, 60:19–61:4.)
Nevertheless, Christian observed that the crosscut was fully cut through,
bolted, and safe for travel when he arrived at the section at 8:30 a.m. on
April 21. (Tr. 59:20–24, 60:8–10, 79:8–19.)

The record for the preshift examination
of the section conducted between 5:00 a.m. and 7:42 a.m. on April 21 indicates
that the first crosscut outby the working face had not yet been bolted at the
time of the preshift examination. (Ex. R–1 at 5; Tr. 75:15–76:8.) In addition,
Raw Coal introduced a record of an onshift examination—conducted after the
issuance of Inspector Christian’s citation—that indicates this same crosscut
had not yet been bolted. (Ex. R–1 at 6.) All of Raw Coal’s witnesses testified
at the hearing that the first crosscut had not been fully cut and bolted when
Christian observed it, and that it was not until later that day that the
company completed this process. (Tr. 204:7–205:18, 227:13–228:4, 250:10–254:5.)
However, Inspector LeMarr, who accompanied Christian, corroborated Christian’s
observation that the first crosscut was fully cut through and bolted when they initially
observed it at 8:30 a.m. (Tr. 277:16–24.) Also, LeMarr witnessed the hole
Christian had observed in the stopping for the fourth connecting crosscut. (Tr.
278:9–19.)

C.        Order
No. 9064486 – The Ventilation Plan Violation

The following day, April 22, Inspector Christian
returned to the mine to continue his regular inspection, again accompanied by
LeMarr. (Tr. 80:21–23, 81:4–5.) At the working section, Christian noticed a
number of problems with the ventilation controls in the area which convinced
him that Raw Coal was not following its MSHA-approved ventilation plan. (Tr.
81:16–83:16.) Most significantly, he testified that an entire line of stoppings
was missing from a series of crosscuts where the ventilation plan indicated
they were supposed to be; instead, it appeared that all of those stoppings had
been moved exactly one series of crosscuts over, where, according to Christian,
they were not permitted. (Tr. 82:2–9, 87:17–88:16.) Christian testified that he
saw leftover materials where the stoppings had once been, including blocks and
plaster still stuck to the mine roof and ribs, suggesting that these stoppings
had indeed been moved. (Tr. 95:10–24.) LeMarr’s testimony at hearing corroborated
Christian’s observations of missing stoppings and leftover materials in the
crosscuts where the approved ventilation plan indicated they were supposed to
be. (Tr. 279:15–280:6.) However, at the hearing, Mine Superintendent Randy Campbell
not only testified that no stoppings had been moved but denied that stoppings
had ever been in the area where Christian believed they should have been. (Tr.
230:15–231:24.) Campbell testified the stoppings were not required to be in the
area where Christian believed the ventilation plan required them and denied there
were any leftover materials stuck to the roof and ribs in those crosscuts. ( Id .)

Inspector Christian testified that he
initially believed Raw Coal had removed the permanent ventilation controls in
order to develop an area beyond those stoppings, and that MSHA had permitted
the company to do this. (Tr. 94:4–96:20.) But, once that area had been worked
out and Raw Coal retreated from there, MSHA expected the company to reinstall
the removed stoppings in the same location where they had originally been, as
required by the mine’s MSHA-approved ventilation plan. ( Id .) According
to Christian, Raw Coal failed to do this and had not obtained any revision to
its approved site-specific plan that would allow a deviation from that strategy.
(Tr. 97:2–98:4.) The most recently approved revisions to the mine’s ventilation
plan had been submitted by Raw Coal on March 25 and approved by MSHA on April
17, five days before Order No. 9064486 was issued. (Tr. 185:1–24.) Campbell
testified that he did not think Raw Coal had received the revised ventilation
plan by the time of the April 22 inspection. (Tr. 234:6–16.) Yet, Ciampanella
testified that he presumed the mine received the approved revisions on April 17
(Tr. 257:15–23), and Christian stated the revised ventilation plan was posted
on the mine bulletin board at the time of the inspection. (Tr. 186:3–5.)

More importantly, Christian believed Raw
Coal had rearranged its permanent and temporary ventilation controls (i.e., both
the stoppings and curtains) to shift from a “split air” plan to a “sweep air” plan.
In a split air arrangement, the intake air that reaches the section splits in
two different directions down both the left and right return entries. But in the
sweep air arrangement Raw Coal had created on April 22, the intake air was
sweeping across the face in a single direction, down the left return entry
only. (Tr. 82:10–23, 85:12–87:12, 90:19–91:21.) Mine Superintendent Campbell
testified that Raw Coal had permissibly maintained a split air arrangement by
allowing room for air to travel down the right side through the section they
were developing at the time. (Tr. 236:18–237:11.) However, Christian maintained
that on April 22 the entries had not yet been cut through in those locations to
allow passage for that air. (Tr. 192:15–193:13.)

As a result of the above conditions, Inspector
Christian observed that Raw Coal had altered the direction of the air in one of
the entries from a return entry to an intake entry, thereby ensuring there was
no available entry on that side of the section for return air to travel. (Tr.
82:23–83:3, 90:8–92:14, 182:12–19.) A regulator (i.e., a hole in a stopping) in
that entry had previously redirected return (dirty) air to the bleeder entry (thus
carrying harmful air-methane mixtures away from working sections to worked-out
areas and finally to the surface). However, the company was now directing
intake (clean) air through the regulator. [8]
(Tr. 83:5–12.) There was now the potential that this regulator could direct
harmful air from the worked out sections to the working section through what
was now, impermissibly, an intake entry. (Tr. 103:1–105:7.) Additionally, this
new arrangement of stoppings blocked all access by foot to a bleeder entry
where a mine examiner would be expected to travel, according to Raw Coal’s approved
ventilation plan. (Tr. 92:16–24.)

Finally, this arrangement created a “dead
air space” off to the side of the section where “there was no air movement
whatsoever.” (Tr. 88:18–24, 102:15–16.) Christian and LeMarr confirmed this by
testing the flow of the air with chemical smoke. (Tr. 88:21–22, 280:7–11.) Although
a dead air space might be especially dangerous for miners in the area,
Christian saw no reason for anyone to enter the area where this lack of air
movement was observed. (Tr. 102:15–19.)

Christian informed Raw Coal that he was
issuing a section 104(d)(2) withdrawal order for a failure to follow the mine’s
approved ventilation plan, and that Raw Coal would have to shut down operations
until it reinstalled its stoppings in accordance with the approved plan. (Tr.
107:10–13.) Correcting the cited condition required 33 miners working
approximately 27 hours over the course of three shifts, after which point Christian
terminated the order. (Tr. 107:14–20.)

IV.  PRINCIPLES
OF LAW

The Commission
has determined that unwarrantable failure is aggravated conduct constituting
more than ordinary negligence. Emery Mining Corp. , 9 FMSHRC 1997, 2001 (Dec.
1987). It is characterized by “indifference,” a “serious lack of reasonable
care,” “reckless disregard,” or “intentional misconduct.” Id. at 2003–04;
see also Buck Creek Coal, Inc. v. MSHA , 52 F.3d 133, 136 (7th Cir. 1995)
(approving the Commission’s unwarrantable failure test).

Whether conduct is “aggravated” in the
context of unwarrantable failure is determined by looking at all the facts and
circumstances of a case to see if aggravating or mitigating factors exist. See
IO Coal Co. , 31 FMSHRC 1346, 1350–51 (Dec. 2009). The Commission has
identified several such factors, including: the length of time a violation has
existed, the extent of the violative condition, whether the operator has been
placed on notice that greater efforts are necessary for compliance, the operator’s
efforts in abating the violative condition, whether the violation was obvious,
whether the violation posed a high degree of danger, and the operator’s
knowledge of the existence of the violation. See id. “Because
supervisors are held to a high standard of care, another important factor
supporting an unwarrantable failure determination is the involvement of a
supervisor in the violation.” Lopke Quarries, Inc ., 23 FMSHRC 705, 711
(July 2001) (citing REB Enters., Inc. , 20 FMSHRC 203, 225 (Mar. 1998)). These
factors are viewed in the context of the factual circumstances of each case. Consolidation
Coal Co. , 22 FMSHRC 340, 353 (Mar. 2000). All relevant facts and
circumstances of each case must be examined to determine whether an actor’s
conduct is aggravated or if mitigating circumstances exist. Id.

The Commission has noted that “[s]ome of
the same evidence that the Judge will examine with respect to the unwarrantable
failure factors will be relevant to the question of the degree of the
operator's negligence,” especially since both unwarrantable failure and high
negligence suggest an aggravated lack of care that is more than ordinary
negligence. Brody Mining, LLC , 37 FMSHRC 1687, 1691, 1703–04 (Aug. 2015)
(citations omitted).

V.  ADDITIONAL FINDINGS
OF FACT, ANALYSIS,

AND CONCLUSIONS
OF LAW

As a preliminary matter, I note that I
found Inspector Christian and Inspector Trainee LeMarr to be credible
witnesses. Respondent attacked Christian and LeMarr for their relative
inexperience as MSHA agents, pointing out that the inspectors’ accounts often
diverged from those of Raw Coal’s agents. Nevertheless, I find that Christian’s
13
years of experience in the mining industry, including as a section foreman,
general mine foreman, and mine superintendent, and LeMarr’s 20 years of
experience in the mining industry more than compensate for their short time as
MSHA officials. (Tr. 12:15–24, 274:2–12.)

Additionally, I do not find any reason
to doubt the veracity of the inspectors’ accounts. In a prehearing statement,
the Respondent’s lay representative initially alluded to a “heated argument”
following the issuance of Order No. 9020987 wherein Christian refused Ciampanella’s
invitation to travel to the return entry and check the DTI’s [9]
on site to confirm that Ciampanella had performed a weekly examination of the air
course. According to Respondent, Christian instead insinuated that Ciampanella
was a liar and the argument “got so bad that the inspector . . . called his
supervisor . . . [and] ask[ed] his supervisor to send a federal marshall to the
mine and arrest” Ciampanella. (Resp’t Prehearing Statement at 1–2.) By
presenting the narrative this way, Respondent implied that Christian’s
subsequent enforcement actions were colored by personal animosity toward Ciampanella.
Yet, at hearing, it was revealed this incident occurred on May 6, well after
all of the orders in this matter were issued, and no witness testified about
Christian threatening to call a federal marshal. (Tr. 131:14–24, 133:17–134:24,
226:6–227:3.) I find these arguments do not undermine Christian’s credibility,
especially as his observations were recorded contemporaneously in his notes
during the April inspection.

Respondent also asks me to discount
Christian’s testimony due to what it alleges are “numerous discrepancies”
between his testimony and the facts in the record. (Resp’t Br. at 3.) For
example, Christian noted that he did not observe Ciampanella examine the left
return aircourse on April 6 while the two were together “for the most part of
the day,” even though the inspector was only at the mine between 6:20 a.m. and
12:48 p.m. (Tr. 24:15–17; Ex. R–5.) According to Respondent’s lay
representative, Christian’s testimony is inconsistent with the facts because
this timeline establishes that Christian technically “wasn’t with Mr. Ciampanella
all day long” (a phrase that Christian himself never used). (Resp’t Br. at 3;
Tr. 112:2–113:1.) I do not find that this alleged discrepancy (if it can even
be called that) undermines Christian’s credibility. If I have chosen not to
address any of the other numerous alleged discrepancies raised by Respondent’s
lay representative in his post-hearing brief, it is because I have found them
to be equally insubstantial (for reasons ably demonstrated by the Secretary in
his reply brief). ( See Sec’y Reply Br. at 1–6.)

A.        Order
No. 9020987 – The Weekly Exam Violation

1. Additional
   Findings of Facts

I find that Raw Coal failed to conduct a
complete exam of the left return aircourse and seals within a week of its prior
examination of the area on March 30. I credit Christian’s and LeMarr’s
testimony that during the inspection on April 7 Ciampanella admitted he had not
conducted the exam on April 6, the prior day, which is bolstered by Christian’s
undisputed testimony that Ciampanella did not conduct the exam during the time
he accompanied Christian on the prior day’s inspection. (Tr. 17:17–24, 24:15–18,
276:3–7.) I further credit Christian’s testimony that Ciampanella immediately,
and without objection, complied with the withdrawal order and did not argue
that he had in fact completed the exam. (Tr. 17:17–18:7, 24:19–22.) I also give
significant weight to the fact that Raw Coal could not produce records
demonstrating it had completed the exam. [10]
(Tr.
19:5–8.) Yet, Respondent now offers an explanation
for this omission: Ciampanella purportedly conducted the exam in segments over
the course of multiple days, including on April 6, but simply forgot to record his
completion of the entire exam. (Tr. 247:20–249:13, 259: 3–8.) When it was
pointed out that the mine’s tracking logbook also did not contain any record of
Ciampanella’s entry into the left return aircourse during that entire week,
Respondent’s lay representative provided an unconvincing explanation: “Tracking
of Mr. Ciampanella is done manually by the outside person. . . . [H]uman error
was possible when manually logging tracking.” (Tr. 22:1–11; Resp’t Br. at 16.) Perhaps
this was a case of the operator repeatedly failing to do what was expected of
it, except of course for the one thing that it was actually cited for. Regardless,
I do not find this explanation credible.  

Raw Coal also claims that had Christian
accompanied Ciampanella for the order’s abatement, he would have found
Ciampanella’s DTI’s in the return aircourse confirming that Raw Coal had in
fact examined the area. ( Tr.
24:23–25:3, 25:4–9; Resp’t Br. at 14–15.) If that were true, one might expect Ciampanella
to have seized on the opportunity to show Christian those DTI’s himself. Instead,
Ciampanella did not allow Christian an opportunity to accompany him on his
examination to abate the order, even though Christian asked to do so. (Tr.
24:23–25:3, 25:4–9.) This behavior further supports my finding that Raw Coal
had not examined the left return.

Moreover, I find it irrelevant that a
month later, in May, Raw Coal conducted but failed to record a different weekly
examination of the left return aircourse, or that Christian was able to confirm
this by accompanying Ciampanella and checking the DTI’s in the area. ( See
Resp’t Br. at 14.) As the Secretary notes, “the May inspection shows Inspector
Christian’s willingness to evaluate all facts provided by the mine.” (Sec’y
Reply Br. at 1–2.) But on April 7, even without consulting the DTI’s, Christian
had ample reason to conclude that Raw Coal had not conducted a weekly exam of
the left return air course. Thus, I reject Respondent’s contention that
Christian “did not conduct even a slightest examination to sustain the burden
of proving” a violation and that “[i]n the absence of DTI evidence there is no
evidence to support a charge that the examination was not conducted.” (Resp’t
Reply Br. at 3.) Rather, the evidence as a whole, including the exam records, the
tracking logs, Ciampanella’s admission, and Raw Coal’s behavior upon being
cited, leads me to find that Raw Coal failed to conduct the weekly exam.     

2.         Analysis
and Conclusions of Law

a.                   
Violation

The Secretary alleges that Raw Coal
violated section 75.364(b)(2), which requires a certified person to examine at
least one entry of each return air course, in its entirety, for hazardous
conditions at least every seven days. (Ex. S–1.) I have found that Raw Coal
failed to examine at least one entry of the left return air course in its
entirety within seven days of its last examination of the area on March 30,
2015. Therefore, the Secretary has established a violation of the cited
standard.

b.                  
Gravity

Inspector Christian determined the
violation was unlikely to result in injury or illness, but that if an injury or
illness occurred, it could reasonably be expected to result in lost workdays or
restricted duty. (Ex. S–1.) Christian also determined that ten persons would be
affected by the violation, those being the miners working on the section and
along the belts. ( Id .; Tr. 33:17–22, 40:7–20.) Respondent did not
challenge these designations. I agree with Christian’s findings. At hearing,
Christian explained that not examining the left return could lead the operator
to fail to identify missing or incomplete stoppings or flooding in the return
aircourse, which could in turn lead to contaminated air being redirected to the
working section rather than out of the mine. (Tr. 34:1–40:20.) This scenario, however
unlikely, could lead the ten miners working on the section to inhale harmful
dust, smoke, or methane. ( Id .) I agree with and adopt Christian’s
gravity determinations.

c.                   
Unwarrantable
Failure and Negligence

The Secretary asserts that Raw Coal’s
conduct amounted to high negligence and was an unwarrantable failure. (Ex. S–1.)
In support, the Secretary argues that Ciampanella admitted to not conducting
the examination and therefore knew of the violative condition, and that the
violation was extensive, long-lasting, obvious, and highly dangerous. (Sec’y
Br. at 14–15.) In contrast, Raw Coal asserts that the negligence and
unwarrantable designations are inappropriate because of the violation’s limited
duration, extent, and prior history. (Resp’t Br. at 17.)

In analyzing an
unwarrantable failure, I must consider the Commission’s factors for determining
aggravated conduct. See IO Coal Co ., 31 FMSHRC at 1350–51. Although
the danger posed by a violation “may be so severe that, by itself, it warrants
a finding of unwarrantable failure[,] . . . the converse of this proposition –
that the absence of significant danger precludes a finding of unwarrantable
failure – is not true.” Manalapan Mining Co . ,
35 FMSHRC 289, 294 (Feb. 2013). Instead, this factor must be “ weighed . . .
against the other relevant factors to determine whether the operator’s conduct
under the circumstances amounted to an unwarrantable failure.” Id . In this case,
the danger was neither a mitigating nor aggravating factor. The failure to
conduct an exam of a return aircourse may expose miners to unknown hazards, but
the eventual exam to abate this order did not uncover serious hazards and the
violation was deemed unlikely to lead to serious injuries. Consistent with
Commission case law, I must weigh this factor against the other relevant
unwarrantable failure factors. The facts and circumstances surrounding this
violation unveil multiple other aggravating factors.

Most
significantly, with regard to Raw Coal’s knowledge of the violation, Ciampanella
admitted to Inspector Christian on April 7 that he had not conducted an exam
the prior day, he lacked any record showing he or anyone else had been in the
left return aircourse that week, and he did not protest to Christian that he
had conducted (but failed to record) any part of the exam during the prior week
(as he later did at hearing). (Tr. 17:17–18:7, 19:5–8, 22:1–8, 24:15–18, 110:18–24,
276:3–7.) Strangely, when asked to accompany Christian down to the return
aircourse, Ciampanella left Christian behind and hurried into the mine by
himself. (Tr. 24:23–25: 9.) Together, these facts indicate to me that Ciampanella
not only knew he had not conducted a weekly exam of the left return aircourse,
but also knew no one else in the mine had either. Ciampanella was a supervisor
with the authority and responsibility to make the required examination. His
knowledge of the violation and culpability, therefore, establish an aggravated
lack of care on the part of the company. See Lopke Quarries, Inc ., 23
FMSHRC at 711.

Two other
factors strongly point toward an unwarrantable failure determination:
extensiveness and obviousness. Any official at the mine who checked either the
examination book or tracking log entries that week would have immediately concluded,
as Christian did, that no one had been in the left return. The fact that this
failure constitutes a violation of MSHA’s weekly examination requirements would
have also been obvious. This is a basic mandatory standard. Additionally, the
violation was extensive in two respects. First, the left return aircourse, by
itself, is undeniably extensive – so extensive, in fact, that according to Ciampanella’s
own description, it could not typically be examined in a single day. (Tr.
249:3–10.) Second, the failure to examine a return aircourse also affects the entire
mine, since return entry hazards can spill over into intake entries absent vigilant
care and attention. (Tr. 39:6–24.)

The other unwarrantable failure factors
(duration, notice, and abatement) appear to be neither mitigating nor
aggravating. The violation existed for slightly more than one shift, a duration
which I do not find short enough to be mitigating, nor long enough to be
particularly aggravating in the context of a weekly examination requirement. (Tr.
32:17–33:8.) Additionally, I do not find the evidence of a lack of notice from
MSHA to be mitigating, when dealing with an obvious and known violation such as
this one. (Tr. 118:1–12.) In considering the abatement factor, the Commission
focuses on compliance efforts made prior to the issuance of the citation or
order. Enlow Fork Mining Co ., 19 FMSHRC 5, 17 (Jan. 1997). The record does
not support a finding of any abatement efforts made prior to the order’s
issuance. Accordingly, I afford these factors no weight in my unwarrantable
failure analysis.

After considering and weighing all the
factors, particularly the violation's obviousness and extensiveness, and the
operator’s knowledge, I conclude that the violation was the result of the
operator’s unwarrantable failure. For these same reasons, I also conclude that Raw
Coal was highly negligent for failing to conduct the weekly exam.

B.        Order
No. 9064481 – The Missing and Incomplete Stoppings Violation

1. Additional
   Findings of Facts

The parties do not dispute that the
second and third connecting crosscuts were safe for travel and did not contain
permanent stoppings on the morning of April 21, 2015. The only factual disputes
concern the first and fourth connecting crosscuts. Specifically, Respondent
claims that the fourth crosscut was adequately plastered on one side and
contained the type of holes common to stoppings, but not eight to ten feet wide
as the Secretary has alleged. (Resp’t Br. at 18.) Respondent also claims that,
contrary to the inspectors’ observations, the first crosscut was unsupported
and not safe for travel at the time Raw Coal was cited. (Resp’t Br. at 20.) After
weighing all the evidence, I find that all four connecting crosscuts outby the
working face were in the conditions that Christian and LeMarr observed.

Christian’s observations of an 8-to-10-foot
hole, exposed wood, and missing plaster in the stopping for the fourth crosscut
are supported not only by LeMarr’s testimony but also by Christian’s
contemporaneous notes and drawings. (Tr. 48:8–12, 53:11, 54:10–15, 61:6–62:17, 278:9–19;
Exs. S–6, S –7.)
Respondent’s lay representative labels the Secretary’s description of this
stopping as “disgusting” and an “[e]mbellishment . . . contradicted by” all available
evidence. (Resp’t Reply Br. at 5–6.) Respondent argues that Christian initially
relied only on the missing stopping in the third connecting crosscut to
establish a violation, allegedly not realizing that the crosscut was legally
permitted to remain open at the time, but then, “[i]n an attempt to save the
order [from being vacated after realizing his mistake], . . . included the 4th
connecting crosscut” in his charge and made “an additional charge that the
crosscut had a 8 to 10 foot opening.” (Resp’t Br. at 7; Resp’t Reply Br. at 6.)
In support of this allegation, Respondent claims that the inspection notes did
not contain any reference to the incomplete stopping’s holes, no document specified
the size of these holes, and in a deposition Inspector Christian disclaimed
reliance on the holes to sustain the order. (Resp’t Br. at 7, 18.)

Respondent’s attempt to paint a
conspiratorial picture falls flat, as this alleged conspiracy rests on several
factual inaccuracies. First, Respondent’s argument that Order No. 9064481
relies only on the missing stopping in the third connecting crosscut to establish
a violation appears premised on the phrase “three open crosscuts” in the order.
(Resp’t Br. at 7.) In context, however, Order No. 9064481 is intended to convey
that three crosscuts were fully open, while the fourth was only partially open.
( See Ex. S–6 (“When observed there were three open crosscuts on the left
return stopping line. Also, the fourth crosscut outby had not been
completed.”).)

Respondent’s lay representative is also
mistaken in arguing that Christian’s deposition testimony did not mention relying
on the problems with the fourth crosscut’s stopping in citing the operator. (Resp’t
Br. at 18.) The specific portion of Christian’s deposition testimony cited by
Respondent was ambiguous on this point, because Christian was cut off before he
could fully answer the question posed. But, Christian later provided clarifying
testimony fully consistent with the description in the order, noting the
problems with both the third and fourth crosscut. [11]
( See Ex. R–8 at 33, 37; Tr. 154:21–155:3.) Thus, I conclude that
Christian’s deposition testimony does not alter the order’s meaning. By
including the issues with the fourth connecting crosscut in the body of Order
No. 9064481, the Secretary provided clear notice to Raw Coal that those issues
formed part of the basis for the order. And, contrary to Respondent’s claims,
the body of Order No. 9064481 is not the only contemporaneous document that
mentions these issues. The inspector’s contemporaneous notes and diagram also
make reference to holes in the fourth stopping. (Ex. S–7 at 15.) In contrast,
no such contemporaneous corroborating evidence exists for Raw Coal’s competing
claims. ( See, e.g. , Ex. R–2 (documenting Ciampanella’s objections to
Order No. 9064481 on the back of the order but not addressing the issues alleged
in the order with the fourth connecting crosscut’s incomplete stopping.) While Christian’s
notes and the order itself do not specify the exact size of the holes,
Christian’s and LeMarr’s testimony were clear and consistent on this point: the
hole (or opening) was 8-10 feet long, about half the width of the crosscut. Therefore,
I credit Christian’s testimony regarding the fourth connecting crosscut and
reject Respondent’s unsubstantiated conspiratorial allegations. [12]

Regarding the first connecting crosscut,
both parties introduced into evidence contemporaneous documents supporting
their respective positions. To support its argument that the first crosscut was
not fully cleaned, bolted, or safe for travel when the order was issued, Raw
Coal first cites to a note that Ciampanella wrote on the evening after the exam
denying the fact of the violation. (Ex. R–2.) Next, Raw Coal cites to contemporaneous
preshift and onshift examination reports indicating the crosscut closest to the
working face had not been bolted until well after the order was issued. (Ex. R–1.)
The Secretary, in turn, cites to Christian’s contemporaneous notes and diagrams
in support of his testimony that the first crosscut was available for travel
when he arrived. (Ex. S–7 at 6–15.)

I ultimately credit the testimony of
Christian and LeMarr, which is supported by Christian’s contemporaneous notes
and diagram. I recognize their testimony conflicts with at least the onshift
exam report for the area from later that day and possibly the preshift report
from the time of the inspection. [13]
However, based on Christian’s substantial expertise and experience with
ventilation plans, and based on LeMarr’s clear and consistent corroborating testimony,
I find Christian’s description of the first connecting crosscut more reliable
and less susceptible to the risk of confusion, especially since irregularities
in multiple preshift exam reports undercut Raw Coal’s argument about timing. [14]
( Tr.
9:22–13:6, 277:9–278:8.) Thus, I find that the first connecting crosscut was
cut, bolted, and safe for travel when Christian issued Order No. 9064481. I
also credit Christian’s testimony that when asked for mitigating circumstances,
Ciampanella responded, “Why should I install those stoppings, when I’m going to
tear them back out tonight,” which I find indicative of Ciampanella’s knowledge
of the violation. (Tr. 67:7–13.)

2.         Analysis
and Conclusions of Law

a.         Violation

The
Secretary alleges a violation of section 75.333(b)(1), which requires that
ventilation control devices be built between intake and return air courses and
maintained up to and including the third connecting crosscut outby the working
face. (Ex. S–6.) Although this requirement does not apply to rooms that are 600
feet or less in length or to sections specifically exempted by an approved
ventilation plan, Christian explained the latter exception did not apply to the
cited area, and Raw Coal has not argued that either exception applies. (Tr.
63:3–66:24.) The standard does not specify the exact timing for when the
stopping for the third connecting crosscut must be completed, but MSHA has
issued guidance in a Procedure Instruction Letter (“PIL”) clarifying that
“permanent stoppings installed to separate intake and return aircourses must be
completed in the third crosscut outby the face by the time the face crosscut
[i.e., the first crosscut] is cleaned, bolted, and ready for travel,” and both
parties agree that this interpretation governs in this proceeding. (Exs. S–19, S–20;
Sec’y Br. at 22; Resp’t Br. at 18.)

I conclude that Raw Coal violated the standard by failing
to build a stopping in the third connecting crosscut upon cutting, cleaning,
and bolting the first connecting crosscut prior to the inspection, and by
failing to maintain the fourth connecting crosscut in a condition that complied
with the standard’s requirements. The Secretary proved that this stopping was
improperly maintained in that it lacked necessary plaster, contained an opening
of 8–10 feet, and short circuited enough intake air into the return entry to
result in legally insufficient airflow (7,000 CFM vs. 12,000 CFM) to the
working face. The missing stopping in the third connecting crosscut and the
improperly maintained stopping in the fourth connecting crosscut lead me to
conclude that Raw Coal only maintained its stopping line up to the fifth
crosscut outby the working face.

Therefore, I find that the Secretary has satisfied
his burden for proving a violation.

b.                  
Gravity

Christian
determined that the violation was unlikely to result in injury or illness, but
that in the event of an injury, lost workdays or restricted duty injuries could
reasonably be expected. (Ex. S–6.) He determined that missing or incomplete
stoppings could redirect harmful return air to a working section, leading the
nine miners working in the section to inhale harmful dust, smoke, or methane. (Tr.
71:17–72:7.) I agree with this analysis and affirm Christian’s gravity
determinations, which were undisputed by Raw Coal.

c.         Unwarrantable
Failure and Negligence

The
Secretary designated this violation as an unwarrantable failure and
characterized Raw Coal’s negligence as high. (Ex. S–6.) In support, the
Secretary alleges that Raw Coal knew of and permitted the violation, was on notice
that greater efforts were necessary for compliance, and that the violation was highly
dangerous, obvious, extensive, and existed for an extended period of time. (Sec’y
Br. at 30–33.) Respondent’s lay representative largely passes on his opportunity
to contest the negligence or unwarrantable nature of the violation, stating,
“Since the Responde[nt] believed there was no violation[,] any question
regarding mitigating circumstances would be [a] mockery of the Respondent’s
good faith belief.” (Resp’t Reply Br. at 6.) His reply brief does, however,
address the Secretary’s notice argument briefly, labeling the use of a recent
prior citation to establish notice as “preposterous.” ( Id .)

While the IO Coal and Consolidation
Coal factors are useful for determining whether an operator’s culpability
rises to the level of “indifference,” “serious lack of reasonable care,” or
“reckless disregard” that generally characterize an unwarrantable failure, it
is important to note, before addressing any of those factors, that this
violation involves intentional misconduct. “Intentional misconduct, whether by
commission or omission, is similar in terms of culpability to . . . indifferent,
willful, or knowing behavior . . . [and therefore] is a form of unwarrantable failure
for purposes of the Mine Act.” Rochester & Pittsburgh Coal Co ., 13
FMSHRC 189, 194 (Feb. 1991). I have reached the conclusion that this misconduct
was intentional based on Ciampanella’s statement to Christian, “Why should I
install those stoppings, when I’m going to tear them back out tonight when I
begin pillaring?” (Tr. 67:7–13.) Like Christian, I interpret this statement to
mean that Raw Coal knowingly and deliberately failed to construct and finish
necessary stoppings near the working face because it knew it would be retreat
mining imminently and therefore did not view these safety measures as being
worth the effort. This, however, was not the company’s call to make. An
operator cannot pick and choose which standards to comply with based upon its own
determination that the hazards addressed by those standards may be tolerated
for a limited amount of time.  

Placing these facts in the context of
the Commission’s unwarrantable factors, I conclude that not only does Ciampanella’s
statement establish the operator’s knowledge of an obvious violation, but it
also suggests that the company had taken no steps to abate the violation prior
to being cited. In addition, as a supervisor, Ciampanella’s involvement in the creation
of the violative condition is an independent factor which establishes an
aggravated lack of care. Newtown Energy, Inc. ,
38 FMSHRC 2033, 2037 (Aug. 2016).

In assessing several of the other
unwarrantable factors, I find it useful to distinguish between the two violative
conditions cited in the order. As noted previously, it is unclear whether the
first connecting crosscut was made available for travel during the previous
night’s shift, or only immediately prior to the inspection. (Tr. 59:3–61:4.) Thus,
the third connecting crosscut may have impermissibly lacked a permanent
stopping for only a brief period of time and the omission may not have been
obvious during that period. However, I conclude that the incomplete stopping in
the fourth connecting crosscut would have been obvious to examiners for a much
longer period of time. The hole (or opening) was half the width of the
stopping, and Christian credibly explained that the stopping for this crosscut
remained incomplete for at least 10, and possibly up to 24, hours. (Tr. 48:8–12,
61:6–62:17, 180:13–181:1.) Therefore, taken together, the violative conditions
were obvious and existed for an extended period of time. I also conclude that
the violation was extensive, given that Raw Coal violated the standard in two
separate crosscuts and that the lack of permanent ventilation controls led to
insufficient airflow to the section face. (Tr. 53:17–54:12.) Although this lack
of airflow was not reasonably likely to lead to serious injury, and thus the
degree of danger is not an aggravating factor, the duration, obviousness, and extensiveness
of the violation are.

Raw Coal was also on notice that greater
efforts were necessary for compliance. Christian had issued citations for
missing stoppings and inadequate ventilation roughly two weeks prior and had discussed
the same issues with some, but not all, of the foremen involved in the subject
order. (Tr. 54:16–56:23, 73:20–23; Ex. R–8 at 14–15.) Raw Coal now disputes
whether one of those prior citations was in fact justified. (Resp’t Rep. Br. at
6.) However, it does not dispute that the citations were issued, that Raw Coal
paid penalties for them, or that the resulting conversations with MSHA
occurred. ( See id .) Those are the more relevant considerations when analyzing
the extent to which the operator was placed on notice that greater efforts were
necessary for compliance. See Dawes Rigging & Crane Rental , 36
FMSHRC 3075, 3080 n.5 (“[I]t is well settled that we examine the operator’s
history of violations, warnings from inspectors, and other forms of specific
warnings to determine if the operator has been placed on notice of a persistent
unsafe condition or practice at its mine.”). Notice which the operator finds unwarranted
is notice nonetheless.

Raw Coal’s lay representative also
argues, “An admonishment from MSHA to the Respondent that greater effort is
needed from a one time issuance of a non-significant and substantial violation
is preposterous.” (Resp’t Reply Br. at 6.) However, in rejecting a related
argument, the Commission recently clarified that “it is not pertinent to
the analysis of the notice factor in unwarrantable failure determinations that
the prior violations were not designated as S&S.” Manalapan Mining Co .,
35 FMSHRC at 295 – 96. Similarly, in
this matter, the non-S&S nature of the prior citation does not invalidate
the notice it provided.

After examining the facts of this
violation and the relevant factors, I conclude that the Secretary met his
burden of proving that the violation was properly designated as an
unwarrantable failure and that Raw Coal’s negligence was properly characterized
as high.

C.        Order
No. 9064486 – The Ventilation Plan Violation

1.         Additional
Findings of Facts

Christian detailed a number of
discrepancies between the ventilation controls at the mine as he observed them
on April 22, and the ventilation controls displayed on the mine’s most recently
revised ventilation plan map. ( See generally Tr. 81:16–96:6.) Raw Coal,
for the most part, does not deny these discrepancies existed, but instead
disputes their cause and effect. (Resp’t Br. at 20–21.) Raw Coal does not deny
that an entire line of stoppings was found exactly one entry over from where
the ventilation plan indicated they should be. But, whereas Christian testified
that the stoppings had been physically moved from their approved location and
remnants of those stoppings were still stuck to the ribs and walls of the
crosscuts, indicating where they had once been (Tr. 95:10–24), Mine Superintendent
Campbell denied the stoppings had ever been moved or that there were any
visible remnants to support Christian’s belief. (Tr. 230:15–231:24.) In
addition, Raw Coal denies that the ventilation controls created a sweep air
arrangement or blocked the passage of return air down the right side. ( See
Resp’t Br. at 20.) This denial reflects significant disagreement about whether
the working section at the time of the inspection had been sufficiently
developed to provide a path for return air to flow down the right side. ( Compare
Tr. 192:15–193:13 (Christian’s testimony that a right return entry had not been
developed yet), with Tr. 236:18–237:11 (Campbell’s testimony that air
was split down the left return and right bleeder entry); see also Tr. 290:1–17
(LeMarr’s testimony that he was not sure).)

On
each of these points, I credit Christian’s observations. Once again, the MSHA
inspector had significant experience developing and complying with mine
ventilation plans going back to his time as a mine superintendent, which lends
credibility to his testimony. (Tr. 9:22–13:6.) In addition, LeMarr fully and
credibly corroborated Christian’s observations of leftover materials where the
stoppings had once been, including blocks and plaster still stuck to the mine
roof and ribs. (Tr. 279:15–280:6.) Having examined the map of the section, I determine
that this change eliminated the entire right return entry by altering the
direction of air in that entry to intake air. ( See Exs. S–14, S–15.)

Further, I credit Christian’s testimony
that the working section had not been developed sufficiently to allow for
return air to proceed down a different entry on the right side, and that the
ventilation controls created a sweep air arrangement while Raw Coal developed
that entry. [15]
(Tr. 192:15–194:13.) Lastly, neither party disputes that the altered arrangement
created a dead air space near the section, and I thus find that to be the case
as well. ( See Resp’t Br. at 12.)

2.         Analysis
and Conclusions of Law

a.         Violation

Order
No. 9064486 alleges a violation of section 75.370(a)(1), which requires
operators to (1) develop and follow an approved ventilation plan; (2) that is
designed to control methane and respirable dust and shall be suitable to the
mine’s conditions and mining system; and (3) consists of the plan content
prescribed in section 75.371 and a map as prescribed in section 75.372. 30
C.F.R. § 75.370(a)(1). Portions of the map containing information required
under section 75.371 are subject to the district manager’s approval. Id.
Section 75.371’s plan content provisions include “section and face ventilation
systems used . . . [and] drawings illustrating how each system is used.” Id.  §
75.371(f). In addition, “any intentional change to the ventilation system that
alters the main air current or any split of the main air current in a manner
that could materially affect the safety and health of the miners” must be
approved by a district manager in a proposed ventilation plan before
implementation. Id . § 75.370(d). In a Program Information Bulletin, MSHA
lists examples of intentional changes that would materially affect the safety
or health of miners, including “changing the direction of air in an air
course.” (Ex. S–21.)

The mine’s ventilation plan was approved
in 2012 but was regularly amended in subsequent years following requests for
revision from the operator. (Ex. S–12.) Prior to the order, MSHA had approved a
revision to the mine’s ventilation map and incorporated it into the approved
ventilation plan on April 17, 2015, where it was then enforceable as part of
the requirements of section 75.370(a)(1). (Ex. S–22.) At the time of the
inspection, the ventilation map for the most recently approved revisions
displayed a line of stoppings between two entries separating intake air from
return air. (Ex. S–14.) I conclude that Raw Coal failed to follow its ventilation
plan by both removing this line of stoppings and reversing the direction of air
in what had been a return entry. The company also violated the ventilation plan
by adding unapproved temporary and permanent ventilation controls that blocked
access to the right return air course, created a dead air space, and ensured
that intake air was now sweeping across the face in one direction rather than
splitting in multiple directions. [16]
Because these changes materially affected the safety or health of miners by
increasing the risk of methane and contaminated air reaching the working
section, Raw Coal was required to stick to the ventilation system diagrammed in
its approved ventilation map until it sought and received approval for any
desired changes. (Tr. 102:1–105:11.)

Respondent offers two arguments for why
it believes it complied with its ventilation plan. It first argues that “[t]he
ventilation base plan explicitly allows the operator to vary stopping lines and
number of entries.” (Resp’t Br. at 21 (citing Ex. S–12 at 18).) In other words,
Raw Coal argues it is not required to strictly follow the layout of the ventilation
controls in its approved ventilation map; rather, it may vary the placement of
its stopping lines and the location of return and intake entries as it sees fit.
In support of this contention, Respondent cites to an illustrative diagram
contained in the ventilation base plan. ( Id .) The diagram is titled
“Typical Face Ventilation” and displays a generic layout of entries, crosscuts,
and ventilation controls that might be found in any mine, with notes and
symbols indicating how ventilation controls should normally operate in such conditions.
In order to alert the reader that this diagram is merely illustrative, the page
notes that “Stopping lines and number of entries shown are typical and may
vary.” (Ex. S–12 at 18.) But, Raw Coal zeroes in on this language under the
mistaken belief that it exempts the operator from the site-specific map’s
requirements. (Resp’t Br. at 21.)

I conclude that the diagram and accompanying
notes for the “typical” ventilation map included in the base plan do not modify
the actual requirements in the mine’s revised site-specific ventilation plan, from
which language about varying stoppings or entries is entirely absent. (Ex. S–22.)
The ventilation base plan’s cited language does not affect Raw Coal’s
obligations to comply with the requirements of the most recently approved ventilation
map. Simply put, Raw Coal requested changes to its ventilation plan and
documented those changes on a revised map; it must now abide by those approved
changes. No variations are allowed.

Even if some variation were permitted, I
conclude that moving a line of stoppings such that it completely eliminates a
return air course, changes the direction of air in the return entry, switches
to a sweep air plan, and creates a dead air space (thereby materially affecting
the safety and health of miners) does not constitute an acceptable “variation”
of the ventilation map’s requirements. This is especially true, as even the
base plan map that the company references applies only to “split ventilation”
by its own explicit terms. ( See Ex. S–12 at 18-20.)

Raw Coal also argues that the most
recent revised plan “was not specifically related to ventilation controls” but
instead was merely intended “to change the bleeder block travel ways to
monitoring points.” (Resp’t Br. at 20–21.) According to the operator’s stated understanding
of the plan, the ventilation controls did not have to be installed in the areas
designated on the map until after Raw Coal had finished cutting through the
section and connecting it to the bleeder entry, and since the operator was
cited only five days after the revised plan was approved, it was not given
enough time to accomplish this set of tasks. ( Id .)

I agree that the revised plan relates to
Raw Coal’s attempt to change the bleeders to monitoring points; but, consistent
with Christian’s understanding of the plan, I do not accept Raw Coal’s argument
that the revised ventilation plan’s specific ventilation control
requirements were effectively irrelevant until it had finished completing that other
task. (Tr. 183:3–185:6.) The revised plan did not set forth any such conditions
as to the order in which those tasks should be completed, and the operator has
not cited to any other evidence or authority supporting its understanding of
the plan. ( See Ex. S–22.) Indeed, Raw Coal’s positon—that it may mine
first and worry about ventilation later—undermines the entire purpose of having
a ventilation system in place and amounts to a complete reversal of the
appropriate process. Raw Coal’s failure to comply with the plan created hazards
independent of whether or not the bleeder travel ways had been developed yet. (Tr.
103:1–105:7.) Thus, I determine that Raw Coal should have brought its
ventilation controls into compliance with the plan as soon as the revisions
were approved by MSHA and received, i.e., five days earlier. (Tr. 257:15–23.) Its
failure to do so establishes a violation of the standard.

b.         Gravity

Raw
Coal did not dispute the gravity of the violation. Christian designated the
violation as unlikely to lead to an injury, but found that lost workdays or
restricted duty injuries to nine miners could be reasonably expected were an
injury to occur. (Ex. S–13.) This was mainly due to the remote possibility that
dust, smoke, or methane could travel from worked-out areas through a regulator
and into the entry that had once been a return entry but now carried common
intake air to the working section, thereby leading the nine miners working in
that section to breathe in the harmful air. (Tr. 103:1–105:7.) Once again, I
affirm these undisputed gravity designations.

c.         Unwarrantable
Failure and Negligence

In addressing the unwarrantable failure
factors for Order No. 9064481, the Respondent’s lay representative explains
that Raw Coal offered no mitigating circumstances to Christian because they
would have fallen on deaf ears and may have only helped to support an
unwarrantable designation. (Resp’t Br. at 22.) The purpose of asking for
mitigating circumstances of course is not entrapment. It is meant to provide
the inspector, and any reviewing body, with all the factual background
necessary to make an informed decision about the negligence and
unwarrantability of an alleged violation. Accordingly, I will consider such
factors below, based on the record I have before me.

The Secretary designated this violation
as an unwarrantable failure, characterizing Raw Coal’s negligence as high. (Ex.
S–13.) In support, the Secretary points to “the knowledge of the operator that
the plan had been violated, as well as the violation’s extensiveness,
obviousness, duration, and high degree of danger.” (Sec'y Br. at 40.) In response,
Raw Coal asserts that it had a good faith belief it was following its approved
ventilation plan, and that the plan was confusing at the stage of the mining
process in which the company was engaged. (Resp’t Br. at 22.) As these
arguments go to the operator’s knowledge and the obviousness of the violation,
it seems appropriate to begin the unwarrantable failure analysis there.

I conclude that Respondent had knowledge
of the violation. In arguing to the contrary, and echoing the beliefs of Mine Superintendent
Campbell, the operator’s lay representative states, “The revised plan used by
the inspector was approved by the district manager on April 17, 2015 [and] may
not have been received by the respondent prior to the order being issued.” (Resp’t
Br. at 23; see also Tr. 234:6–15.) Yet, Christian testified that the
revised plan was posted on the mine’s bulletin board at the time of the
inspection. (Tr. 186:3–5.) This testimony also corroborates foreman Ciampanella’s
belief that the mine received the approved revisions on the very same day they
were approved, and thus I credit Ciampanella’s understanding. (Tr. 257:15–23.)

Curiously, Raw Coal now claims, “The
approved map[s] provided by the Secretary and the [inspector] are confusing
even for reasonable persons with knowledge of ventilation plans.” (Resp’t Br.
at 22.) This argument obscures the fact that the revised map was drafted and
submitted for approval by Raw Coal itself. (Tr. 97:2–22, 106:5–9; Ex. S–22.) It
is difficult to believe Raw Coal had trouble comprehending its own plan, as it
now claims, or to understand how this fact would mitigate against an
unwarrantable failure finding. The Secretary correctly notes that an operator’s
good faith belief that it was in compliance with a cited standard must be
objectively reasonable, see IO Coal , 31 FMSHRC at 1356–60, and the
obviousness of this violation renders Raw Coal’s beliefs anything but that. (Sec’y
Reply Br. at 4.) The company’s purported misreading of its base ventilation plan
and assumption that the revised map’s ventilation control requirements did not
go into effect until after the company had finished developing a bleeder travelway
do not make its beliefs any more reasonable. Further, my findings—that Raw Coal
physically removed the required stoppings from locations where they had been
approved and relocated them to different locations (a process that would have
taken at least the same 27 hours required for the violation’s abatement)—lead
me to conclude that Raw Coal had plenty of time to consider the safety
ramifications and legal consequences of its new arrangement.

Most of the remaining unwarrantable failure
factors support the conclusion that Raw Coal’s conduct exhibited an aggravated
lack of care. Notably, the extent of the violation was significant, with
missing or improperly placed ventilation controls in approximately two dozen
different crosscuts, impacting the entire working section. ( Compare Ex. S–14,
with Ex. S–15.) Consequently, correcting the cited condition required 33
miners working approximately 27 hours over the course of three shifts. (Tr.
107:14–20.) As noted, a violation that extensive would be hard to miss, and
thus its extensiveness and obviousness are both aggravating factors. Because Ciampanella
believed the mine received the approved revisions the day they were approved, five
days before the issued order, and because the operator works three shifts per
day, the violation likely existed for approximately fifteen shifts, a duration
that also supports an unwarrantable failure designation. (Tr. 32:1, 185:7–24,
257:15–23.) All of these facts lead me to the additional conclusion that the
operator made no effort to abate the condition prior to being cited.

While
I do not find the danger of the violation or prior notice that greater efforts
were necessary for compliance to be mitigating or aggravating factors, every
other factor points to the conclusion that Raw Coal’s violation was the result
of its high negligence and its unwarrantable failure to comply with the
standard. I therefore conclude that Raw Coal exhibited high negligence and that
the violation was an unwarrantable failure.

D.        Civil
Penalties

Under section 110(i) of the Mine Act, I
must consider six criteria in assessing a civil penalty: (1) the operator's
history of previous violations; (2) the appropriateness of the penalty relative
to the size of the operator's business; (3) the operator's negligence; (4) the
penalty's effect on the operator's ability to continue in business; (5) the
violation's gravity; and (6) the demonstrated good faith of the operator in
attempting to achieve rapid compliance after notification of a violation. 30
U.S.C. § 820(i).

The parties have stipulated that the
operator abated the cited conditions in good faith. (Joint Ex. 1.) Raw Coal has
not alleged that the proposed penalties would adversely affect its ability to
continue in business. The Commission has held that “[i]n the absence of proof
that the imposition of authorized penalties would adversely affect [an
operator's] ability to continue in business, it is presumed that no such
adverse [e]ffect would occur.” Sellersburg , 5 FMSHRC at 294 (citing Buffalo
Mining Co. , 2 IBMA 226, 247–48 (Sept. 1973)); accord Spurlock Mining Co. ,
16 FMSHRC 697, 700 (Apr. 1994). I further note that Sewell Mine B was a
moderately sized mine, producing 97,208 tons of coal in 2016. (Joint Ex. 1.) In
the 15 months preceding the issuance of each violation, Raw Coal was issued 78
violations, and, during that period, it had zero previous violations of the cited
standard in Order No. 9020987, one other violation of the cited standard in
Order No. 9064481, and eight other violations of the cited standard in Order
No. 9064486. (Exs. S–9, S–17, R–6.) I have determined that the gravity of the
violations was non-S&S, but that the violations were unwarrantable failures
and the result of the operator’s high negligence. After considering these
factors and the evidence as a whole, I determine that the minimum statutory
penalty of $4,000.00 is appropriate for each of the three section 104(d)(2)
orders. See 30 U.S.C. § 845(d).

VI.   ORDER

Respondent
Raw Coal Company, Inc. is hereby ORDERED to PAY a penalty of $12,000.00
within 40 days of the date of this decision.

/s/
Alan G. Paez

Alan
G. Paez

Administrative
Law Judge

Distribution:
(Via Electronic Mail & U.S. Mail – Return Receipt Requested)

Eric
Johnson, Esq. ,
U.S. Department of Labor, Office of the Solicitor,
211 Seventh Avenue North, Suite 420, Nashville, TN 37219-1823

([email protected])

James F. Bowman, Safety Consultant, P.O.
Box 99, Midway, WV 25878-0099

([email protected])

/rd

[1] In this
decision, the hearing transcript, the joint exhibit, the Secretary’s exhibits,
and Raw Coal’s exhibits are abbreviated as “Tr.,” “Joint Ex. #,” “Ex. S–#,”and
“Ex. R–#,” respectively.

[2] The S&S and
unwarrantable failure terminology is taken from section 104(d)(1) of the Act,
30 U.S.C. § 814(d)(1), which distinguishes as more serious any violation that
“could significantly and substantially contribute to the cause and effect of a
. . . mine safety or health hazard” and establishes more severe sanctions for
any violation caused by “an unwarrantable failure of [an] operator to comply
with . . . mandatory health or safety standards.” A violation that is both S&S
and an unwarrantable failure shall result in a 104(d)(1) citation. Id . The
occurrence of another unwarrantable failure violation within the next 90 days,
even if not S&S, shall result in the issuance of a 104(d)(1) order
withdrawing miners from the affected area. Id . Any subsequent unwarrantable
failure withdrawal orders are issued under section 104(d)(2) until such time
that an inspection of the mine discloses no further unwarrantable failure
violations. Id .; Greenwich Collieries , 12 FMSHRC 940, 945 (May
1990). The 104(d)(1) predicate for the three orders in this case was Order No.
9061670, which was issued on January 21, 2015, and became a final order on November
23, 2015. (Tr. 43:9–21; Ex. S–18.)

[3] If one were to
proceed away from the face where coal was actively being mined at the time of
the inspection, the two crosscuts that do not require permanent ventilation
controls would be the first and second crosscuts encountered. Hence, they are
referred to in this decision as the first and second crosscuts outby the
working face. The crosscuts with allegedly missing or incomplete stoppings would
be the third and fourth crosscuts encountered and are accordingly referred to as
the third and fourth crosscuts outby the working face.

[4] While Christian
had only been an MSHA inspector since 2014, he had an additional 13 years of
experience in the mining industry, which included jobs as a section foreman,
general mine foreman, and mine superintendent. (Tr. 9:22–13:6.) As a mine
superintendent, Christian was responsible for developing, reviewing, and
ensuring compliance with mine ventilation plans. (Tr. 12:15–24.) Likewise, LeMarr
joined MSHA in 2014 and had approximately 20 years of prior experience in the
mining industry. (Tr. 274:2–12.)

[5] Although
Christian had already confirmed that Ciampanella had not conducted the exam, there
were at least four other certified foremen who could have done so. ( See
Tr. 44:21–45:19.)

[6] Being 6’5”, Christian
would have needed to crawl through the travelways (which averaged 42 to 44
inches in height) to adequately inspect the return, a process he speculated
would take him eight or nine hours. (Tr. 25:17–26:24.)

[7] Crosscuts must
have adequate roof support to remain safe for travel, so miners can pass
through them without subjecting themselves to the risk of a roof fall. Roof
bolting is an essential part of the mining process and integral to a mine’s
roof control plan.

[8] Christian noted
that whenever a regulator is used for this purpose, a mine operator must then
conduct regular preshift examinations in the areas where intake air is being
directed from worked-out areas; but Raw Coal was not conducting these exams. (Tr.
83:5–12.) Its failure to do so would be the subject of a separate citation. (Ex.
S–16 at 13.)

[9] “DTI’s” is
short for “Date, Time, and Initials.” The term refers to markings at the site
of an examination documenting the date and time of a weekly examination, and
the initials of the individual examining the area. (Tr. 129:12–17.)

[10] At hearing, the
company did submit evidence documenting Ciampanella’s examination between April
1–4 of what he claimed were segments of the left return. (Tr. 247:2–249:5; Ex.
R–4.) However, the referenced areas were not displayed in the exhibits relied
on at hearing, because none of the maps introduced into evidence showed the
entire mine. Without reference to a full mine map, Christian understandably
could not point out the precise location of those areas at hearing, nearly two
years after the inspection. (Tr. 122:19–124:12.) But, Christian credibly
testified that he consulted a mine map at the time of the inspection to confirm
the referenced areas were not located in the left return; instead, they were
located in the right return. (Tr. 122:4–128:8.) Notably, of the referenced
segments purportedly located in the right return, only one is clearly visible
on the truncated maps actually introduced into evidence (the segment labelled “EP-5”),
and that segment is located in the right return aircourse, not the left, on
those maps. (Tr. 124:8–23; Exs. R–4, S–15.) Therefore, I fully credit
Christian’s testimony on this point.

[11] During the
deposition, Respondent’s lay representative asked Christian “Does the stopping
that doesn’t have plaster on it . . . contribute to this order in any way?” Christian
responded, “No. I mean, the stopping wasn’t finished. There [were] still holes
in it, wasn’t --” but he was interrupted by the lay representative with an
entirely different question before he could finish his answer. (Ex. R–8 at 33.)
Later, Christian clarified that the violative condition was “excessive because
of . . . the excessive amount of open crosscuts,” i.e., one stopping was
missing “[a]nd the other one [was] not completed.” ( Id . at 37.)

[12] In his
post-hearing brief, Respondent’s lay representative attempts to put new
information before me regarding the construction of stoppings in order to argue
that the fourth connecting crosscut did not contain any holes. ( See
Resp’t Br. at 6.) As Respondent’s brief does not cite to any evidence in the
record or to any other authority to support its highly technical description of
the construction process, I agree with the Secretary’s characterization of this
“testimony” as improper and give no weight to this description. (Sec’y Reply
Br. at 2.)

[13] Respondent’s
lay representative calls attention to this conflict and suggests the
possibility of criminal penalties against his client if I resolve this
credibility dispute in the Secretary’s favor: “If the preshift and on-shift
reports are not true then two certified foremen have committed a felony,” which
“may result in [] criminal charges against the offender[s].”  (Resp’t Br. at 18–20.)
MSHA now has all of the information it needs to pursue a criminal investigation.
However, as the Secretary points out, Respondent’s lay representative has
presented a “false dichotomy,” because judges routinely make credibility
determinations “without resorting to accusations of criminal activity.” (Sec’y
Reply Br. at 3.)

[14] The Secretary
called into question the reliability of Raw Coal’s examination reports by
pointing out irregularities with the preshift reports submitted into evidence
by Respondent for Order No. 9020987. One preshift exam report for the Main
area, signed and reported by Burb Blankenship on the morning of April 6, 2015,
indicates that a preshift exam was conducted between 5:00 and 7:56 a.m. (Ex.
R–3 at 1.) However, Raw Coal also introduced into evidence another preshift
exam report for the same Main area conducted the very same morning, also signed
and reported by Burb Blankenship, but indicating the exam was conducted between
4:30 and 5:30 a.m. (Ex. R–3 at 2.) Ciampanella conceded that there was a
“problem” with these reports, because conducting “two preshift examinations for
the same morning” is “not the way business is done.” (Tr. 264:19–265:9.) While
Raw Coal later presented a possible theory to explain this irregularity and the
Secretary did not draw further attention to these discrepancies in his
post-hearing briefs, Blankenship’s and Ciampanella’s clear discomfort with the
information contained in these reports gives me pause in relying on Raw Coal’s
examination reports to establish an accurate timeline of events. ( Id .;
Tr. 214:15–217:11.)

[15] Respondent’s
lay representative argues in his post-hearing brief that air readings taken a
day before the inspection confirm that air was split in the section and cites
to one of Raw Coal’s own exhibits for this proposition. (Resp’t Br. at 11, 20; Ex.
R–7.) However, the record lacks any testimony to support this claim, and fails
to provide the necessary context for the information contained in the cited
exhibit. I agree with the Secretary that “Respondent had ample opportunity to
ask questions regarding this claim on direct and cross examination but failed
to do so.” (Sec’y Reply Br. at 3–4.) Such testimony might have helped clarify
exactly where these readings were taken in relation to the missing and moved
ventilation controls and how relevant or significant the measurements listed
are.

[16] Although the
body of Order No. 9064481 detailed many of these problems, Respondent notes
that the order did not explicitly mention that the operator had switched to a
sweep air plan. (Resp’t Br. at 11.) Yet, by noting that the operator had
removed a line of stoppings (that had previously regulated the flow of air in
the right return aircourse) and added an unapproved stopping in an “area that
the section was using for a split of the return,” the order documented the
conditions that created the sweep air arrangement. (Ex. S–13.) Considering how
many problems there were with the ventilation system at the time, I find that
this description adequately alleged the overall violative condition that formed
the basis of the order.